Features

• Use mainstream STM32F722 chip

• Equipped with the latest 42688-P gyroscope

• 16M black box storage

• Integrated LC filter

• Upgrade type-C USB interface

• Directly plugged into the DJI Air Unit

• With TAKER H60_BLS 60A 4IN1 ESC, the flying feel is silky

• Simple and reasonable installation method, the shock absorber can make the gyroscope work very stably

• 9V@2.5A + 5V@3A dual independent BEC

Specifications

FC model: GEP-F722-HD v2 Flight Controller

• MCU: STM32F722

• IMU: ICM42688-P(SPI)

• Air Unit Connection: Direct plugging into DJI Air Unit

• Black Box: 16M onboard

• USB Interface: Type-C

• OSD: BetaFlight OSD w/ AT7456E chip

• BEC: 5V@3A, 9V@2.5A dual BEC

• Firmware Target: GEPRCF722

• Size: 36.85×36.85mm, hole 30.5×30.5mm, φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.

• Input Voltage: 3-6S LiPo

• UART: 5

• Power Filter: Integrated LC filter

• Weight: 8.1g

ESC Model: TAKER H60_BLS 60A 4IN1 ESC

• Input Voltage: 3-6S Lipo

• Ammeter: Support

• Continue Current: 60A

• Burst Current: 65A (5 second)

• Support Protocol: Dshot 150/300/600

• Size: 42×45.7mm, hole30.5×30.5mm, φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.

• Weight: 14.9g

• Target: B_X_30

Includes

1 x Flight Controller

1 x ESC

1 x Capacitor

1 x DJI Air Unit Adapter Cable

1 x Flight Controller Adapter Cable

1 x XT60 Power cable

4 x M3*30 Screws

4 x M3*25 Screws

8 x Nylon nuts

8 x Silicone grommets

2 x sh1.0 4pinsilicone cable

1 x Camera connection cable