The MT3608 2A Max DC-DC Step Up Power Module Booster Power Module is a low-cost module that can step-up a 2 to 24V input voltage up to a 5 to 28V output at up to 2A. DC-DC boost converters step up the input voltage to a higher voltage while also stepping down the available current since the module can’t output more power than its inputs. This boost converter is adjustable and capable of outputting a voltage in the range of 5.0 to 28V at a continuous current of up to 1.5A depending on input/output voltage settings with 1A available with most settings. Since it is a boost converter, the input voltage must be lower than the output voltage.
Features :
• It’s efficient by up to 93%.
• It can source a good amount of current.
• It is an inexpensive converter module.
• It’s simple to adjust to get your desired increase in voltage.
Specification:
• Input Voltage: 2 ~ 24V
• Max. Output Current: 2A
• Operating Temperature: -40 to 90°C
• Efficiency: 93%
• Length: 37mm
• Width: 17mm
• Height: 7mm
• Weight: 4gm
Voltage Adjustment:
• The module has a single-turn potentiometer for adjustment of the output voltage.
• Turning the pot CW decreases the output voltage while turning it CCW increases the output voltage.
• The upper limit of the adjustment range will depend on the input voltage and the load. With a 9V input for instance, at 1A, the upper voltage limit will be approximately 20V.
Module Connections
• VIN+ = Input Voltage
• VIN- = Ground
• VOUT+ = Output Voltage
• VOUT- = Ground. Connected to VIN- on the module.
Package Includes
1 × MT3608 2A Max DC-DC Step Up Booster Power Module

The MT3608 Step Up Booster Module is a compact and efficient DC-DC boost converter that increases low input voltage to a higher adjustable output. It supports up to 2A current and is ideal for Arduino, RC, and DIY electronics projects requiring stable power supply.
৳70