Features:

● Bullet Point

● With small size, light weight, fast positioning, and stable connection. It is suitable for FPV, RC airplane, quadcopter and others to enhance the flight experience.

● Featuring the u-blox M10 platform UBX-M10050 GNSS chipset and BUILT-IN QMC5883 MAG, the module offers stronger performance and more accurate positioning.

● The ultra-thin ceramic antenna uses a special spray painting process to prevent oxidation and scratching, ensuring consistent positioning performance.

● The built-in battery can realize hot start and realize positioning quickly.

● It offers six positioning modes, providing more flexible combinations (default GPS + GLONASS + BDS multi-mode positioning).The measured maximum number of search sats can cover 32pcs.

Note:

Because the GPS chip is a new 10th generation chip, the flight controller needs to flash firmware Betaflight 4.3.0 and above, and the firmware below 4.29 uses the NMEA protocol.

Specification:

● Name: Walksnail WS-M181GPS

● Chip: M10 (ten generation chip)

● Frequency: GPS L1,GLONASS L1,BDSB1,GALILEO E1,SBAS L1.QZSS L1

● Power: 5V

● Size: 18mm*18mm*4.6mm

● Antenna: ceramic antenna (oil spraying process, prevent scratching and oxidation)

● Receiving channels: 72 search channels

● Compass： QMC5883

● Baud rate: 115200dps

● Output protocol: NMEA UBLOX (dual protocol)

● Output frequency: 1Hz-10Hz, Default 10Hz

● Speed accuracy: 0.05m/s

● Horizontal positioning accuracy: 2D ACC1.5m(open air)

● Receiving sensitivity: Trace-162dBm , Capture -160dBm

● weight: About 4.3g

Dynamic characteristics:

● ltitude: 50000m

● Speed: 500m/s

● Acceleration: 4G

● Operating temperature: -40℃-+85℃

● Storage temperature: -40℃-+105℃

Package list:

1 x Walksnail WS-M181 M10 GPS